hp error code 62,laserjet tech support

Hp Error Code 62, Service Error 62 Laser Printer Message

message errors codes repair problems,troubleshooting

 


 

     

HP LASER PRINTER ERROR CODE 62 - MEMORY ERROR, DEFECTIVE FORMATTER BOARD.

ALL HP LASER PRINTERS

1. Improperly fitted SIMMs or font cartridge.

2. Defective internal memory. 

3. Defective SIMM slot. 

4. Defective font cartridge.

5. Replace memory Dimms.

6. Replace formatter board.

HP LASER PRINTERS 2, 2D, 2P, 2P+, 3, 3D, 3P, 4P

1. Defective formatter board.

2. Replace formatter board.

HP LASER PRINTERS 3SI, 4SI, 4V

1. Defective memory Simms

2. Reseat memory Simms or Replace bad memory Simms..

HP LASER PRINTER 3200

1.  Temporary formatter error

2.  Replace the formatter board.

HP LASER PRINTER 4100 

1. Internal memory error

2. Reseat memory Dimms.

3. Replace all memory Dimms.

4. Replace formatter board.

HP LASER PRINTER 2100, 3100 FAX, 4000, 4050, 8150

1. Temporary memory error

2. Reseat all memory or Replace all memory.

3. Replace formatter board.

HP LASER PRINTER 2300

1. No system found.

2. This message indicates that no system was found. The printer software system is corrupt.

3. Turn the printer power off, and then turn the printer power on.

HP LASER PRINTERS 2410, 2420, 2430

1. No system found.

2. Turn the printer off and then turn the printer on again.

3. Place a Type I Compact Flash card that has been loaded with a firmware image into Slot 0 (SYSTEM CODE) on the formatter, and then move the boot select jumper to the top two boot select pins.

4. Replace the formatter.

HP LASER PRINTER P3005, 3027M, 3035 ERROR 62

1. No system was found on the printer.

2. Turn the device off and then on.

3. Update the firmware. 

4. If the message persists, replace the formatter.

HP LASER PRINTER 4200, 4300, 4250, 4350 ERROR CODE 62.0

1. No system firmware image was found.

2. Replace the firmware DIMM.

3. Replace the formatter board.

HP LASER PRINTER 4345MFP, 5025MFP, 5035MFP

1. A problem exists with the MFP firmware.

2. Turn the MFP off, and then turn the MFP on.

3. Reseat the firmware memory card, which is in slot 1.

4. Upgrade the firmware.

5. Replace the formatter.

HP COLOR LASER PRINTER 4500, 4550 ERROR 62 

1. Firmware error. Turn printer off then on.

2.  Replace Firmware dimms. 

HP COLOR LASER PRINTER 4500, 4550 ERROR 62.X

1. Internal memory error.

2. Replace the memory dimms.

HP COLOR LASER PRINTER 4500, 4550 ERROR 62.M

1. The firmware ran out of memory.

2. Check the printer settings.

HP COLOR LASER PRINTER 4600, 5200, 5500

1. NO system was found

2. Turn printer off and on.

3. Reseat the firmware Dimm. Making sure it is in the 168-pin slot J1

4. Replace firmware Dimm.

5, Replace formatter board.

HP LASER PRINTER 5SI, 8000

1. Defective formatter board.

2. Replace formatter board.

HP LASER PRINTER 5100 ERROR 62.X

1. A problem exists in the printer's memory. X=location

2. Reseat or replace the specified DIMM.

HP LASER PRINTER 8100, 8150 ERROR 62.0

1. The internal memory

2. Replace the mother board.

HP LASER PRINTER 8100, 8150 ERROR 62.1, 61.2, 61.3

1. 1 to 3 is the slot number on the mother board that the bad DIMM is on

2. Replace the bad DIMM or replace all the DIMMS.

3. Replace the mother board.

HP COLOR LASER PRINTER 8500, 8550 

1. Problem with internal memory.

2. Replace all the memory DIMMS.

HP LASER PRINTER 9000, 9040, 9050MFP 

1. Problem with internal memory. 

2. Move Dimms to different slot.

3. Reseat all memory Dimms.

4. Replace all memory Dimms.

5. Replace the formatter board.
 

 

Home | Error Codes | Hp Printers | Toner Cartridges | Hp Printer Accessories | Hp Plotters
 

Copyright © 2011 Advanced Laser Services, Inc.