hp error code 56,tech support errors codes

Hp Error Code 56, Service Errors 56,Codes Tech Support

laser printer service message repair

 


 

     

HP LASER PRINTER ERROR CODE 56 - PRINTER DEVICE ERROR / MAINLY DUPLEXER.

HP LASER PRINTERS 2D, 3D

1. Output selector knob not in duplex position.

HP LASER PRINTERS 3SI, 4SI

1. Trying to print envelope in duplex mode.

HP LASER PRINTERS 1100, 1200, 2100, 2200, 3100 FAX, 3200 FAX, 4000, 4050, 4100, 8000

1. Temporary error. Turn printer off and back on.

2. Check printer configuration.

3 verify the accessory connection.

HP LASER PRINTERS 2300

1. A temporary printing error occurred as a result of an incorrect input or output request.

2. Turn printer power off and then on.

3. Never had this error code for this printer and the service book is not clear. I think this would mean you are trying to print with and input and output that is not there or defective devise.

HP LASER PRINTERS 2410, 2420, 2430 ERROR 56.XX

1. Error occurred as a result of an incorrect input or output request.

2. Turn the power off and then turn the printer on again.

3. Reinstall all input trays.

4. Reinstall the stacker or stapler/stacker.

5. Remove all non-HP paper handling devices.

HP LASER PRINTER 3027M/3035

1. A temporary printing error has occurred.

2. The the device off and turn the device on.

3. If the message persists, uninstall and reinstall all input trays.

4. If the message persists, replace the formatter.

HP LASER PRINTERS 4200, 4300, 4250, 4350 ERROR 56.1

1. Unknown input device installed.

2. Reinstall all paper input trays.

3. Remove all non-HP paper handling devices.

HP LASER PRINTERS 4200, 4300, 4250, 4350 ERROR 56.2

1. Unknown output device installed.

2. Reinstall the stacker or stapler/stacker.

3. Remove all non-HP paper handling devices.

HP LASER PRINTER 4345MFP, 5025MFP, 5035MFP ERROR 56.X

1. The input device or output device is unknown.

56.1 = unknown input device

56.2 = unknown output device

2. Turn the MFP off, and then turn the MFP on.

3. For 56.1 errors, reinstall all of the input devices. For 56.2 errors, reinstall the output bin, the stapler/stacker, or the 3-bin mailbox.

4. Remove all non-HP paper handling devices.

5. Perform a RFU.

HP LASER PRINTER 5000, 5100

1. A temporary printing error occurred.

2. Illegal input or  Illegal out put. 

3. Bad accessory connection.

HP LASER PRINTER 5200

1. A printer error has occurred, Input device

2. Turn the printer off and then on.

3. Remove all input devices, and then reinstall them.

4. Check the input device connectors.

5. Replace any damaged connectors.

HP LASER PRINTER 8100, 8150

1. Illegal input and Illegal out put.

2. Turn printer off and back on.

3. Check the printers configuration.

HP COLOR LASER PRINTER 8500, 8550 ERROR 56.1

1. Indicates an input feed error

2. Trying to print transparencies through the duplexer.

3. Make sure all paper trays is installed correctly.

HP COLOR LASER PRINTER 8500, 8550 ERROR 56.2

1. It is and output error or there are transparencies in the duplexer.

2. Remove all paper in the printer.

HP LASER PRINTER 9000
, 9040, 9050MFP ERROR 56.1

1. Illegal input selection.

2. Check printer configuration.

3. Check application settings.

4. Re-install the duplexer with the printer power off.

5. Replace the duplexer ass'y.

HP LASER PRINTER 9000, 9040, 9050MFP ERROR 56.2

1. Duplexer removed while printer power is on.

2. Check printer configuration.

3. Check application settings.

4. Re-install the duplexer with the printer power off.

5. Replace the duplexer ass'y.

 

Home | Error Codes | Hp Printers | Toner Cartridges | Hp Printer Accessories | Hp Plotters
 

Copyright © 2011 Advanced Laser Services, Inc.