hp error code 41, fix message errors

Hp Error Code 41, Service Errors 41, Laser Printer Repair Fuser

laser printer codes repair service,tech support

 


 

     

HP LASER PRINTER ERROR CODE 41 – TEMPORARY PRINT ENGINE FAILURE / 41.1, 41.2,41.3  UNEXPECTED PAPER SIZE / 41.4, 41.5 UNEXPECTED PAPER TYPE

ALL HP LASER PRINTERS ERROR CODE 41

1. Momentary error.

2. High voltage discharge.

3. Reset unit / Cycle power

4. Bad formatter PCA board 

5. Bad DC controller board. 


HP LASER PRINTERS 2, 2D, 3, 3D, 2P, 3p

1. Bad laser scanner cable.

2. Bent broken fiber optic cable.

3. Paper feed problems. 

HP LASER PRINTER 2P 

1. For S/NS between 2925J00000 and 3047J99999. Replace Fuser. 

HP LASER PRINTER 5P, 6P 

1. A temporary error occurred while printing.

HP LASER PRINTER 5L, 6L 

1. Temporary error. 

2. Engine error. 

3. Power cycle the printer

4.Replace formatter and D.C. controller

HP LASER PRINTER 5SI, 8000, 4000, 4050

1. Temporary error or misprint error

2. Replace the laser scanner

3. Replace the engine controller board

HP LASER PRINTERS 1200, 2200, 3100 FAX, 3200 FAX, 4100 

1. Replace ECU. 

2. Replace laser scanner. 

3. Reseat connections to laser scanner and the engine controller board. 

HP LASER PRINTER 2200 ERROR 41.X

1. Press GO. The page containing the error will be printed.

2. If the error persists, reseat the connections to the laser/scanner, formatter, and engine controller.

3. Replace the laser/scanner.

4. Replace the formatter.

5. Replace the engine  controller.

HP LASER PRINTER 2300, 2410, 2420, 2430, 4200, 4300 ERROR 41.X

1. A temporary printing error has occurred. 

2. If error doesn't go away after a cycle power.

3. Bad D.C. controller.

HP LASER PRINTER P3005, 5200 ERROR 41.X

1. A device error has occurred.

2. Press the SELECT button to continue or press ? for more information.

3. If the message persists after exiting help, turn the device off and then on.

4. If the message persists, contact HP Support.

HP LASER PRINTER 3027M/3035 ERROR 41.X

1. A temporary printing error occurred.

X = 2: beam detect misprint

X = 8: fuser too hot

2. Touch OK to clear the error. If the error is not cleared, turn the device off and then on.

3. If the message persists, replace the fuser.

HP LASER PRINTER 4100, 4100MFP ERROR 41.X

1. A temporary printing error has occurred.

2. Press GO. The page containing the error will automatically be reprinted.

3. Reseat the connections to the laser scanner and then to the engine controller board.

4. Replace the laser scanner.

5. Replace the engine controller board.

HP LASER PRINTER 4200, 4250, 4300, 4350 ERROR 41.X

1. A printer error has occurred.

X=1: unknown misprint error

X=2: beam-detect misprint error

X=4: no VSYNC error

X=7: feed delay error

X=9: signal noise error

2. Press SELECT to continue or press HELP for more information

3. If the message persists, turn the printer off and then on again.

4. If the error becomes a frequent problem, replace the DC Controller PCA.

HP LASER PRINTER 4345MFP, 5025MFP, 5035MFP ERROR 41.X

1. A temporary printing error occurred.

X=1 Unknown misprint error

X=2 Beam detect misprint error

X=4 No VYSNC error

X=8 Fuser over temperature error

X=7 Feed delay error

X=9 Signal noise error

2. Touch OK to clear the error. If the error is not cleared, turn the MFP off, and then turn the MFP on.

3. If these errors become a frequent problem, replace the DC controller PCA. 

HP LASER PRINTER 4600, 5500 ERROR CODE 41.1

1. Unknown misprint error.

2. Turn printer off and then on again.

HP LASER PRINTER 5000, 8150

1. A temporary  print error has occurred.

2. If error doesn't go away after a cycle power.

3. Replace the laser scanner

4. Replace the engine controller board.




 HP LASER PRINTER ERROR CODE 41.1 OR 41.2 OR 41.3 WONG PAPER SIZE.

ALL HP LASER PRINTERS


1. Defective connections.

2. Laser scanner connections or bad laser scanner ass'y.

3. Paper multi feed or wrong size paper.

4. Paper size selection does not match installed paper.

5. One of the cassettes is overfull or improperly adjusted.

6. Paper is out of spec.

7. Paper pick up and feed rollers are  worn. Replace pick up roller.

8. Bad input unite. Replace the input unite.

9. Printer pulls more than one sheet thru. Worn feed and separation rollers.

HP LASER PRINTER  1100, 1200, 2200, 3100, 3200, 4000, 4050, 4100

1. Reload the tray with correct media size.

2. Make sure tray is loaded properly.

3. Check sensors for proper operation. 

4. Worn feed and separation rollers

5. Make sure the length guide, width guide and size selector switch on the paper tray have been correctly. Make sure that paper is under the front paper tabs.

6. Check the control panel setting for the paper size is correctly configured.

HP LASER PRINTER 2300, 2410, 2420, 2430 ERROR 41.3

1. Unexpected paper size in tray.

2. Reload the tray with the correct media size.

3. Reconfigure the size in a tray so that contains the size required for the print job.

4. Typically caused if two or more sheets stick together when feeding.

5. Change pick up rollers and separation pad.

6. Replace the engine controller board.

HP LASER PRINTER P3005 ERROR 41.3

1. Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.

2. Press the SELECT button to print from a different tray.

3. To print from the current tray, load the tray with the size and type indicated.

4. Ensure that all trays are configured correctly before printing again.

HP LASER PRINTER 4200, 4300, 4250, 4350 ERROR 41.3

1. The media that is loaded is longer or shorter in the feed direction that the size that is configured for the paper tray.

2. Print the configuration page and verify that the tray settings match the media in the tray.

3. Check  the paper path sensor flags can move freely.

4. Worn feed and separation rollers.

5. Bad  D.C. controller board.

HP LASER PRINTER 5000, 5100, 8000

1. Reload the tray with correct media size.

2. Make sure tray is loaded properly.

3. Check sensors for proper operation. 

4. Worn feed and separation rollers

5. Make sure the length guide, width guide and size selector switch on the paper tray have been correctly. Make sure that paper is under the front paper tabs.

6. Check the control panel setting for the paper size is correctly configured.

HP LASER PRINTER 8100,8150 ERROR 41.3

1. The paper size you are trying to print is not the same as the control panel setting.

2. Make sure the printer settings in the tray's are the same as control panel and driver.

3. Faulty paper sizing switch on printer.

4. Replace the pick up and separation pad for tray 1.

5. Worn feed and separation rollers.

HP COLOR LASER PRINTER 4600, 5500 ERROR 41.3 UNEXPECTED PAPER SIZE IN TRAY.

1. The paper is loaded which is longer or shorter in the feed direction than the size configured for the tray.

2. Reload the paper in the tray and make sure the length adjustment is set correctly. 

3. Replace the feed and separation rollers.  

HP LASER PRINTER ERROR CODES 41.2, 41.4, 41.6, 41.7, 41.9 UNKNOWN MISPRINT ERROR

HP LASER PRINTER 2300 ERROR  41.2, 41.4, 41.6, 41.7, 41.9

1. Error 41.2 - Beam detect misprint error.

2. Error 41.4 - No VSYNC error.

3. Error 41.6  - IBT detection error.

4. Error 41.7 - Feed delay error.

5. Error 41.9 - Noise VSREQ error.

6. Turn the printer off and then on the clear the error codes.

HP LASER PRINTER 8100,8150 ERROR 41.1, 41.2, 41.4, 41.5, 41.9

1. Replace the laser scanner ass'y.

2. Replace the engine controller board.

HP LASER PRINTER 4500, 4550

1. Unexpected paper size. 

2. Make sure paper loaded in the paper tray correctly and load  the requested size media in tray. 

3. Worn feed and separation rollers

4. IBT drawer is bad.

HP COLOR LASER PRINTER 4600, 5500 ERROR CODE 41.7, 41.9

1. A feed delay error and a noise VSREQ error.

2. Turn the printer on and then off.

HP COLOR LASER PRINTER 8500, 8550 ERROR 41.2   Paper tray pick up and feed rollers are worn. Replace paper tray Pulls more than one sheet of paper. Worn feed rollers - Replace paper tray.

1. Indicates that a beam detect laser scanner error.

2. Replace the laser scanner ass'y.

3. Replace the D.C. controller board.

HP COLOR LASER PRINTER 8500, 8550 ERROR 41.3

1. Unexpected paper size in paper tray.

2. Verify the paper guides are set correctly. 

3. Worn feed and separation rollers

4. Load the requested size media in tray 1.

HP LASER PRINTER 9000
, 9040, 9050MFP ERROR 41.1, 41.2

1. Unknown misprint error

2. Replace the laser scanner ass'y

3. Replace the upper cable guide ass'y

4. Replace the D.C. controller board.

HP LASER PRINTER 9000, 9040, 9050MFP ERROR 41.3

1. Unexpected paper size or paper type.

2. Verify standard/custom switch setting. 

2. Temporary error- turn printer off then on and resend job. 

3. Feed and separation rollers are worn
 
HP LASER PRINTER ERROR CODE 41.4 OR 41.5 WONG PAPER TYPE.


ALL HP LASER PRINTERS


1. Defective DC controller or formatter PCA.

 2. Usually occurs with smooth media such as. Labels or transparencies. Load media one sheet at a time.

3. The media type that is loaded is different than what the tray is configured to use.

HP LASER PRINTERS 3SI, 4SI

1. Toner cartridge tab broken.

HP LASER PRINTERS 1200, 2200, 3100, 3200, 4100 

1. Check sensors for proper operation. 

HP LASER PRINTER 2300 ERROR 41.5 UNEXPECTED PAPER TYPE IN PAPER TRAY

1.The printer detected a paper type different from the expected size.

2. Reload the tray with the correct paper type.

3. Reconfigure the media type that matches the driver setting type or reconfigure the paper tray type to the printer.

HP LASER PRINTER P3005 ERROR 41.5

1. The device senses a different media type than what is configured in the tray.

2. Press the SELECT button to print from a different tray.

3 To print from the current tray, load the tray with the size and type indicated.

4. Ensure that all trays are configured correctly before printing again.

HP COLOR LASER PRINTER 4500, 4550

1. The paper tray is configured for specific media type, but the printer detects a different media type loaded.

2. Verify that the correct media is loaded in the input tray and the printer control panel is configured correctly.

3. Check for paper jam at the registration plate under the IBT drawer. The engine tries to check the OHT sensor and receives an error.

4. Replace the IBT drawer.

HP COLOR LASER PRINTER 4600, 5500 ERROR 41.5

1. The printer senses a different media type in the media paper path than configured in the paper tray.

2. Configured the driver with the printer paper type settings.

3. Reload the driver or download a new driver from H.P.

HP COLOR LASER PRINTER 8500, 8550 ERROR 41.5

1.The printer was expecting one type of paper from an paper tray and a different type was feed

2. Replace OHT sensors.

3. Replace the controller board.

HP LASER PRINTER 9000, 9040, 9050MFP ERROR 41.5

1. Replace the media with the correct type or reconfigure the tray to use the current type.

2. Verify application settings.

 

Home | Error Codes | Hp Printers | Toner Cartridges | Hp Printer Accessories | Hp Plotters
 

Copyright © 2011 Advanced Laser Services, Inc.